Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100

Product Details
Customization: Available
Breaking Capacity: High
Type: Current Fuse
Manufacturer/Factory

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
77
Management System Certification
OHSAS18001:2007, ISO9001:2015, ISO14001:2015
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
  • Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100
Find Similar Products

Basic Info.

Model NO.
RW-12/100
Usage
High Voltage
Shape
Circle
Fusing Speed
FF
Model Number
Can Be Ordered
Rated Voltage
10kv
Rated Current
100A/200A
Brand Name
L&R or as Per Clients′ Requirements
Transport Package
Export Standard Package or as Client Requirement
Specification
ISO9001: 2008; IEC
Trademark
L&R or according to customer′s requirement
Origin
Wenzhou, Zhejiang
Production Capacity
25, 000PCS/Month

Product Description

Dropout Fuse Cutout

Introduction

Dropout Fuse Cutout is a kind of outdoor used high voltage protective device. To be connected with incoming feeder of distribution transformer or distribution line it mainly protect transformer or lines from short circuit and overload and on/off loading current.
Dropout Fuse Cutout is composed of insulator supports and fuse tube static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube.Fuse tube is composed of inside extinguishing tubeouter phenolic compound paper tube or epoxy glass tube.Load switching fuse cutout provides enforced elastic auxiliary contacts and arc-extinguishing enclosure for switching on/off loading current. At normally working via fuse link tightened the fuse tube is fixed to form up of close position In case system occur faults. fault current result in fuse melt. immediately and take place electric arc which let arc-extinguishing tube being heated and explode a lot of gas. This will produce high pressure and blow off the arc along with tube.

After fuse link melt moving contact has no tightened strength again mechanism is locked and fuse tube dropout Cutout now is in open position.

When it needs to switch off during cut out loading. Operator shallvia insulating operating bar pull the moving contactat its beginning main contact and auxiliary static contactis contacted still.

Whiling pulling the auxiliary contact is separated between auxiliary contacts there occur electric arc and the arc will be lengthened in arc- extinguishing enclosure gap and meanwhilearc-extinguishingexplode gas to blow off the arc during current passing zero.

Material: Silicone rubber or Porcelain.
ManufacturingStandard:IEC60282-2Pole Mounted 12kv 100A Drop-out Fuse Cutout Outdoor High Voltage RW-12/100

Usage: high voltage
Breaking capacity: high
Safety standards: IEC
Installation: open frame
Markets: global
Packing: export carton or as customized
 
Model No. Rated Voltage/KV Rated Current/ A Breaking Capacity MVA Power Frequency Withstand Voltage- Dry/ kvrms 1 min Power Frequency Withstand Voltage- Wet/ kvrms 1 min
Upper limit Lower limit
RW3-10/100 10 100 100 10 42 34
RW3-10/200 10 200 200 20 42 34

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier