What can we do for you?
1) Good quality guarantee (2 years).
2) Competitive Price (Factory direct price).
3) Agent service in all the world.
4) On time delivery .
5) We offer sample for free.
6) Professional Technology .
7) Quality Control through the whole Manufacturing process.
Introduction:
Dropout Fuse Cutout is a kind of outdoor used high voltage
protective device. To be connected with incoming feeder
of distribution transformer or distribution line it mainly
protect transformer or lines from short circuit and overload,
and on/off loading current.
Dropout Fuse Cutout is composed of insulator supports and
fuse tube, static contacts is fixed on two sides of insulator
support and moving contact is installed on two ends of fuse
tube. Fuse tube is composed of inside extinguishing tube,
outer phenolic compound paper tube or epoxy glass tube.
Load switching fuse cutout provides enforced elastic
auxiliary contacts and arc-extinguishing enclosure for
switching on/off loading current. At normally working via
fuse link tightened the fuse tube is fixed to form up of close
position. In case system occur faults, fault current result in
fuse melt immediately and take place electric arc, which
let arc-extinguishing tube being heated and explode a lot
of gas. This will produce high pressure and blow off the arc
along with tube.
After fuse link melt moving contact has no tightened
strength again, mechanism is locked and fuse tube dropout.
Cutout now is in open position.
When it needs to switch off during cut out loading. Operator
shall via insulating operating bar pull the moving contact,
at its beginning main contact and auxiliary static contact is
contacted still.
Whiling pulling the auxiliary contact is separated between
auxiliary contacts there occur electric arc and the arc will
be lengthened in arc-extinguishing enclosure gap and
meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.
Material: Silicone rubber or Porcelain
Manufacturing Standard: IEC 60282
| Rated Voltage(KV) |
Rated Current(A) |
Breaking Current(A) |
Impulse Voltage Bil(A) |
Power- frequency Withstand voltage(KV) |
Creepage Distance(mm) |
Weight (kg) |
| 12 |
100 |
10000 |
110 |
45 |
380 |
3.5 |
| 12 |
200 |
12000 |
110 |
45 |
380 |
3.5 |
Our product are fully comply with the standard such as IEC, BS, ANSI and other well recognized standard and requirement.
We strongly believe in the importance of maintaining high quality in all our products. We have brought in advanced quality tests as to ensure strict quality control before delivery. We have adopted advanced date management system to monitor and to supervise all individual process through our whole production lines of the product with traceabledata in details and recorded at all level.
Our customers
Our products have being in service on electrical networks of more than more than 20 countries from 2005.
We had supplied our products and services to the below customers:CHINESE STATE GRID,KENYA KPLC & REA,UGANDA REA & UMEME,TANZANIA TANESCO,GHANA ECG, SOUTH AFRICA ESKOM & ARB,NIGERIAL NEPA,COTE D'IVOIRE CIENERGIES,JORDAN EDCO & NEPCO, OMAN PDO, VIETNAM EVN,MEXICO IUSA,ECUADOR CELEC,NEPAL NEA,......….
Here, We look forward to your joining.
Audited Supplier 
){kind=link}